background image

9

Cleaning Recommendation for Hansgrohe Products

Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to 

design and functionality.  To avoid damage and returns, it is necessary to consider certain criteria when cleaning.

Cleaning Materials for Faucets and Showers

Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning 

faucets and showers:

Only use cleaning materials which are explicitly intended for this type of application.

Never use cleaning materials which contain hydrochloric, formic, phosphoric, or acetic acid, as they cause considerable damage.

Never mix one cleaning material with another.

Never use cleaning materials or appliances with an abrasive effect, such as unsuitable cleaning powders, sponge pads, or micro fiber 

cloths.

Cleaning Instructions for Faucets and Showers

Please follow the cleaning material manufacturer’s instructions.  In addition, pay attention to the following points:

Clean the faucets and showers as and when required

Use the amount of cleaning product and the amount of time recommended by the manufacturer.  Do not leave the cleaner on the fixture 

longer than necessary. 

Regular cleaning can prevent calcification.

When using spray cleaners, spray first onto a soft cloth or sponge.  Never spray directly onto the faucet as droplets can enter openings 

and gaps and cause damage.

After cleaning, rinse thoroughly with clean water to remove any cleaner residue.

Important

Residues of liquid soaps, shampoos, and shower foams can also cause damage, so rinse with clean water after using.

Please note:

 if the surface is already damaged, the effect of cleaning materials will cause further damage.

Components with damaged surfaces must be replaced or injury could result. 

Damage caused by improper treatment is not covered under the warranty.

Recommandations pour le nettoyage des produits Hansgrohe

Les robinetteries modernes de lavabo, de cuisine et de douche utilisent des matériaux très différents pour répondre aux besoins du marché en 
termes de conception et de fonctionnalité.  Certaines règles de base doivent être respectées lors du nettoyage de ces produits afin d’éviter de 
les endommager ou d’avoir à les retourner.

Produits de nettoyage pour robinetteries et douches

Les acides sont une partie intégrante nécessaire de tous les produits de détartrage; il faut cependant prendre les précautions suivantes lors du 
nettoyage des robinets et des douches :

N’utilisez que des produits/articles de nettoyage conçus spécifiquement pour les articles de robinetterie et de douche.

N’utilisez jamais de produits/articles de nettoyage contenant de l’acide chlorhydrique, formique, phosphorique ou acétique car ils 

pourraient causer des dommages considérables. 

Ne mélangez jamais deux produits de nettoyage.

N’utilisez jamais de produits/articles de nettoyage de nature abrasive tels que poudres de nettoyage, tampons-éponge ou chiffons 

microfibre non appropriés.

Instructions de nettoyage pour robinetteries et douches

Veuillez suivre les instructions du fabricant de produits/articles de nettoyage.  De plus, tenez compte des conseils suivants :

Содержание C 042230 Series









































Отзывы: