10
English
Place the handle over the stem (1).
Turn the handle counter-clockwise as far as it will
go (2).
Measure the temperature of the output water (3).
If the valve opens through hot,
reverse the cartridge. See page 12.
If the maximum high temperature
is greater than 120°F or that
permitted by local plumbing code,
adjust the rotational limit stop. See
page 14.
Turn the water off.
Remove the handle (4).
Lubricate the cartridge o-ring using a small
amount of white plumber's grease.
Install the sleeve.
Install the escutcheon.
Open the stops using a 4 mm Allen wrench (1).
Install the carrier plate (2).
Install the carrier plate screws.
1
2
3
4
4 mm
1
2