manualshive.com logo in svg

Hanna Instruments HI 83200, Инструкция по эксплуатации

Поделиться
Скачать
Hanna Instruments HI 83200 Скачать руководство пользователя страница 66

130

131

WARRANTY

All Hanna Instruments

 

meters are warranted for two years against defects in workmanship and materials

when used for its intended purpose and maintained according to the instructions.
This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered.
If service is required, contact your dealer. If under warranty, report the model number, date of purchase,

serial number and the nature of the failure. If the repair is not covered by the warranty, you will be notified
of the charges incurred.
If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization Number

from the Customer Service Department and then send it with shipment costs prepaid. When shipping any

instrument, make sure it is properly packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty card within 14 days from the date of

purchase.

Hanna Instruments reserves the right to modify the design, construction and appearance of its products

without advance notice.

HANNA LITERATURE

Hanna publishes a wide range of catalogs and handbooks for an equally wide range of applications. The

reference literature currently covers areas such as:

• 

Water Treatment

• 

Process

• 

Swimming Pools

• 

Agriculture

• 

Food

• 

Laboratory

and many others. New reference material is constantly being added to the library.
For these and other catalogs, handbooks and leaflets contact your dealer or the Hanna Customer Service

Center nearest to you. To find the Hanna Office in your vicinity, check our home page at www.hannainst.com.

Recommendations for Users

Before using these products, make sure that they are entirely suitable for your specific application and for the environment in which they are used.
Operation of these instruments may cause unacceptable interferences to other electronic equipments, this requiring the operator to take all necessary steps to

correct interferences.
Any variation introduced by the user to the supplied equipment may degrade the instruments' EMC performance.
To avoid damages or burns, do not put the instrument in microwave ovens. For yours and the instrument safety do not use or store the instrument in hazardous
environments.

OTHER ACCESSORIES

HI 731318

cloth for wiping cuvettes (4 pcs)

HI 731321

glass cuvettes (4 pcs)

HI 731325W

new cap for cuvette (4 pcs)

HI 740034

cap for 100 mL beaker (6 pcs)

HI 740036

100 mL plastic beaker (6 pcs)

HI 740038

60 mL glass bottle and stopper

HI 740142

1 mL graduated syringe

HI 740143

1 mL graduated syringe (6 pcs)

HI 740144

pipette tip (6 pcs)

HI 740157

plastic refilling pipette (20 pcs)

HI 740220

25 mL glass cylinders with caps (2 pcs)

HI 740223

170 mL plastic beaker

HI 740224

170 mL plastic beakers (12 pcs)

HI 740225

60 mL graduated syringe

HI 740226

5 mL graduated syringe

HI 740227

filter assembly

HI 740228

filter discs (25 pcs)

HI 740229

100 mL graduated cylinder

HI 740230

230 mL demineralized water

HI 92000

Windows compatible software

HI 920013

PC connection cable

HI 93703-50

cuvette cleaning solution (230 mL)

HI 93703-54

dried resin (100 g)

HI 93703-55

activated carbon (50 pcs)

Содержание HI 83200




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды