Hanna Instruments HALO2 HI9810452, Инструкция по эксплуатации, Страница: 3 / 12

3 Preliminary Examination
1. PRELIMINARY EXAMINATION
Remove the tester and accessories from packaging and examine them carefully. For further assistance, please
contact your local Hanna Instruments office or email us at tech@hannainst.com.
Each
HI9810452 is supplied with a starter kit consisting of:
• pH 4.01 buffer solution, 20 mL (2 sachets)
• pH 7.01 buffer solution, 20 mL (2 sachets)
• Electrode cleaning solution for Meat, Grease, and Fats,
20 mL (2 sachets)
• Electrode storage solution, 13 mL dropper bottle (1 pc.)
• Gelled bridge electrolyte, 13 mL dropper bottle (1 pc.)
• 3V Lithium battery – CR2032
• Quick reference guide with instrument quality certificate
Designated slot for the meat blade storage. FC097 blade is sold separately.
Note : Save all packing material until you are sure that the tester works correctly. Any damaged or defective item
must be returned in its original packing material with the supplied accessories.
2. SPECIFICATIONS
pH
Range 0.00 to 12.00 pH
Resolution 0.01 or 0.1 pH
Accuracy ±0.05 pH
mV *
Range pH/mV conversion
Resolution 0.1 or 1 mV
Temperature
Range ** 0.0 to 60.0 °C (32.0 to 140.0 °F)
Resolution 0.1 °C; 0.1 °F
Accuracy ±0.5 °C; ±0.9 °F
Calibration
Up to three points or four points *
Automatic buffer recognition with Standard buffers
Hanna (pH 1.68 *, 4.01, 7.01, 10.01) or NIST (pH 1.68 *, 4.01, 6.86, 9.18)
Temperature compensation Automatic (ATC) or Manual (MTC) *
Electrode
Body material Polyvinylidene Fluoride (PVDF)
Glass Low Temperature (LT)
Junction Open
Reference cell Double, Ag/AgCl
Electrolyte Gel (refillable)
Tip / Shape Conic, Ø 5 x 10 mm (Ø 0.19 x 0.39”)
Outer diameter 12 mm (0.47“)
Length 75 mm (2.95”)
Battery type 3V Lithium – CR2032
Battery life Approximately 1000 hours (500 hours with Bluetooth enabled)
Environment 0 to 50 °C (32 to 122 °F)
Casing IP65 ingress protection
Dimensions 51 x 150 x 21 mm (2.0 x 5.9 x 0.8”)
Weight 45 g (1.6 oz.)
* Available with Hanna Lab App
** Measuring outside the recommended operating temperature range may damage the gel electrolyte and void product warranty.
Note : The tester can display measurements from —2.00 to 16.00 pH. Measurements outside of the pH range will flash. If this happens, assess
the integrity of the tester and the type of measured sample.