Hanna Instruments GROLINE HI981421, Инструкция по эксплуатации

Страница: 44 / 48

44
DA
TA ST
ORAGE
7.3. DATA EXPORT
There are three options. Two are used to export data and the third is used to clear the log and start
a new log session.
Highlight History from Menu using
▲ ▼
and press Options
to access History/Export options.
Note: Data will be exported in the EC/TDS format the monitor
is configured at the time of export. This includes temperature
unit, TDS factor and mode.
Exporting to flash drive
Connect USB C to the monitor.
Highlight Export to flash drive using
▲▼
, then press Select .
The file transfer will begin after connection has been established.
If the flash drive contains a previously saved file, it will query
about overwriting the file. If the monitor has an ID, the file name
will reflect that identification and a letter. Exporting a second file
from the same monitor will increment the letter by one (e.g. if the
ID is 123, the file names will be GLM0123 A through GLM0123
Z. If all letters are taken, an overwrite message appears.
After the file transfer has ended, the monitor displays "File transfer
completed" message. Press
Done to return to Export screen.
Note: If “!” appears in logged data (*.csv and History/Details screen), an alarm is triggered. The
symbol for High/Low alarm is added next to Max/Min column of the affected parameter.
Note: If “!!” appears in logged data (*.csv and History/Details screen), the probe is used beyond
monitor's specifications and the data is not considered reliable.