Hanna Instruments GROLINE HI981421, Инструкция по эксплуатации

Страница: 15 / 48

15
HI1285‑9
With the monitor turned off, connect the HI1285‑9 probe to the DIN socket on the bottom of the
monitor by aligning the pins and pushing in the plug. Tighten the nut to ensure a good connection.
Remove the protective cap from the probe before taking any measurements.
Please note that the probe needs to be calibrated before installing in a pipe line or tank.
Do not be alarmed if salt deposits are present!
This is normal with electrodes and they will disappear when rinsed with water.
5
3
4
1
2
3 m cable
1. DIN connector
2. PVC body
3. pH sensor
4. EC sensor
5. PTFE junction
The probe has a build‑in temperature sensor.
PROBE DESCRIPTION