Unicorn 3101 User Manual
Copyright © 2008
Hanlong Technology Co., Ltd Page 29 of 29
Please check the Service section of Hanlong’s Web site to obtain this TFTP server’s IP
address.
NOTES:
When Hanlong ATA boot up, it will send TFTP or HTTP request to download configuration
files, there are two configuration files, one is “cfg.txt” and the other is “cfg001fc1xxxxxx”,
where “001fc1xxxxxx” is the MAC address of the Unicorn 3101. These two files are for
initial automatically provisioning purpose only, for normal TFTP or HTTP firmware upgrade,
the following error messages in a TFTP or HTTP server log can be ignored.
8
RESTORE FACTORY DEFAULT SETTINGS
Warning:
Restoring to the factory default settings will delete all configuration information of the
device.
Steps to follow in restoring to factory default settings:
a)
Press “***” for voice prompt.
b)
Enter “99” and then you will hear the voice prompt “Reset”.
c)
Enter the number “862584658050”. A "click" sound will be heard.
d)
Wait for 15 seconds.
9
TECHNICAL SUPPORT CONTACT
Email:
