Unicorn 3101 User Manual
Copyright © 2008
Hanlong Technology Co., Ltd Page 12 of 29
number and “#” for a dial tone, then hang up.
*73
Cancel Unconditional Call Forward.
To cancel “Unconditional Call Forward”, dial “*73” and get the dial tone,
then hang up.
*90
Busy Call Forward.
To use this feature, dial “*90” and get the dial tone. Then dial the forward
number and “#” for a dial tone, then hang up.
*91
Cancel Busy Call Forward.
To cancel “Busy Call Forward”, dial “*91” and get the dial tone, then hang
up.
*92
Delayed Call Forward.
To use this feature, dial “*92” and get the dial tone. Dial the forward
number and “#” for a dial tone and then hang up.
*93
Cancel Delayed Call Forward.
To cancel this feature, dial “*93”, get the dial tone, and then hang up.
Flash/Hook
call waiting indication.
When in conversation without an incoming call, this action will switch to a
new channel to make a new call.
5.3.2
PSTN Pass Through
When Unicorn 3101 is out of power or loses registration or if the network connection is
down, the RJ 11 line jack on the side of Unicorn 3101 will function as a pass through
connection for PSTN calls. Users will be able to use the same analog phone for PSTN
calls.
5.4
FAX
Unicorn3101 supports FAX in two modes: T.38 (Fax over IP) and fax pass through. T.38 is
the preferred method because it is more reliable and works well in most network
conditions. If the service provider supports T.38, please use this method by selecting Fax
mode to be T.38. If the service provider does not support T.38, pass-through mode may
be used. To send or receive faxes in fax pass through mode, users will need to select all
the Preferred Codecs to be PCMU/PCMA.
5.5
Status Light Indicator
Following tables show the Unicorn 3101 button light pattern indication.
Light Indicator
Signal Pattern
Status Meaning
Red Light
Red light flashes every 2
seconds (if internet connection
is configured for DHCP)
DHCP failed or WAN port has no
ethernet connection.
