Unicorn 3101 User Manual
Copyright © 2008
Hanlong Technology Co., Ltd Page 15 of 29
End User Password for access to Basic User Options:
1234
6.1.6
Configuration Options and Explanations
After a correct password is entered in the login screen, the embedded web server inside
the Unicorn 3101 will show the configuration page, which is explained in details below:
6.1.6.1
Device Status
DEVICE STATUS
Setting Options
Meaning
MAC Address
The device ID, in HEX format. This is a very important ID for
ISP troubleshooting.
WAN IP Address
There are 2 modes under which the Unicorn 3101 can
operate:
- If DHCP mode is enabled, then all the field values for the
Static IP mode are not used (even though they are still saved
in the chipset's memory). The Unicorn 3101 will acquire its
IP address from the first DHCP server it discovers from the
office/home network it is connected to. To use the PPPoE
feature, the PPPoE account settings need to be set. The
Unicorn 3101 will attempt to establish a PPPoE session if any
of the PPPoE fields have been entered with data.
- If Static IP mode is enabled, then the IP address, Subnet
Mask, Default Router IP address, DNS Server 1 (primary),
DNS Server 2 (secondary) fields will need to be configured by
the user. These fields are reset to zero by default.
Product Model
This product model is Unicorn3101
Software Version
Information of software
System Uptime
Show system uptime since last reboot
PPPoE Link Up
Indicates where the PPPoE connection is up if the
Uicorn3101 is connected to the DSL modem.
