manualshive.com logo in svg

Hanil HyperVAC HVC-2124, Руководство пользователя

Поделиться
Скачать
Hanil HyperVAC HVC-2124 Скачать руководство пользователя страница 24

www.ihanil.com

24/29    

Error

Possible Causes

Solution

Error 1

RPM Sensor

- Turn off and on the main power to check the device.

- If the error code keeps coming up, please contact us.

Error 2

Lid Open

- If lid opens while the device running or the device has any 

trouble in lid sensor, this message may come up.

- Remove the dirt at the lid latch and then close the lid

completely. Check the Lid LED on the display window. If the 

error code keeps coming up, please contact us.

Error 3

Motor 

Overheating

- If the motor is overheated, this message may appear.

- Keep the main power off for an hour, and then turn on to 

check the device.

- If the error code keeps coming up, please contact us.

Error 4

Low Voltage

- If the input power (V/Hz) is at least 10% less than the

recommended, this message may appear.

- Turn off the main power and check the voltage of the Power 

supply (V/Hz).

- Use AVR to provide proper power.

Error 5

High Voltage

- If the input power (V/Hz) is at least 10% more than the 

recommended, this message may appear.

- Turn off the main power and check the voltage of the Power 

supply (V/Hz).

- Use AVR to provide proper power.

Error 6

Overspeed

- If the rotor spins faster than allowed, it may cause overload 

to motor capacity or trouble in the output of motor.

- Turn off and on the main power to check the device.

- If the error code keeps coming up, please contact us.

Error 7

Low

Temperature

- If the actual temperature is lower than the set

temperature, this message may come up.

- If the error code keeps coming up, please contact

us.

Error 8

High

Temperature

- If the actual temperature is higher than the set

temperature, this message may come up.

- If the error code keeps coming up, please contact

us.

6. Troubleshooting

6.2 Error Codes

Содержание HyperVAC HVC-2124

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды