Hanil HyperVAC HVC-2124, Руководство пользователя

Страница: 15 / 32

Technical Support : +82-2-3452-8966 / techsupport@ihanil.com 15/29
4. Operation
4.1 Key Functions of Control Panel
① Use to set the of RPM (200 ~ 2,000 rpm)
② Use to set time, available range up to 23 hr 59 min or continuous
③
Use to set temperature ( RT ~
60
℃ ) . Display the set temperature while idle,
and actual temperature during operation.
④ Use to display the vacuum pressure for checking the vacuum level
⑤
Use to save the set values or recall the saved parameters
(Saving capacity max. 100 memories).
⑥
Use to confirm the parameter setting
/ Check the preset values during operation
⑦ Use to start or stop operation
⑧ Use to open the device lid. Only activated when the vacuum is released.
⑨
Use for (1) manual on/off of vacuum pump. It is only activated while the
device is idle. And use to (2) move to Sub Display from Main Display.
Refer to 6-1-2. Sub Display for more detailed information.
⑩
Use to start operation at the set chamber temperature. PRE-HEAT LED blinks
during the setting and is kept on when the setting is completed.
[Main Display]
① ② ③ ④ ⑤ ⑥ ⑦
Up
Down
⑨ ⑩
⑧