HANGCHA CPD10-A, Руководство по эксплуатации и обслуживанию

Страница: 35 / 82

31
19. Safeguard protect you do not be hurt by
the goods fallen. Load bracket protect you
load goods smoothly. It is forbidden to use
truck without safeguard or load bracket.
20. It is forbidden to walk down the fork or the
attachment.
– It is forbidden to walk up the fork or stand
on the fork.
21. It is forbidden to put your hands, arms or
head stretch between the mast and safeguard.
Once clamped, the life has danger.
– It is forbidden to put your hands in inner
and outer mast.
22. The goods is liable to drop turning or
passing rough road when it departures the
center. And the forklift may turn over more
probably.
23.
Don‟t stack loads on forks in such a way
that the top of loads exceeds the load backrest
height. If unavoidable, make sure the load is
fastened. When handling bulky loads that
restrict your vision operate the truck in reverse
or have a guide. When lead by a guide, make
sure you understand hand, flag, whistle or
other signals. When handling long loads such
as pipe, lumber etc or in the case of the
Large-sized model, or operate with long
attachment, be extremely careful of load end
swing at corners or in narrow aisles. Be alert
for others.
24. Use minimum forward and reverse tilt
when stacking and un-stacking loads. Never
tilt forward unless load is over stack or at low
lift height.
–
When stacking loads on a high place,
once make the mast vertical at a height of
15 to 20 cm above the ground and then lift
the load farther. Never attempt to tilt the
mast beyond vertical when the load is
raised high.
–
To un-stack loads from a high place, insert
forks into the pallet and drive backwards,
then lower the load. Tilt the mast
backwards after lowering. Never attempt
to tilt the mast with the load raised high.
25. It is dangerous to travel with forks higher
than appropriate position regardless of
whether loaded or not. Keep the good
traveling posture. (When traveling, the forks
should be 15 to 30 cm above the ground or
floor and the mast tilted backward)
– Do not operate the side shift mechanism,
if equipped, when the forks are raised and
loaded, since this will cause the truck to
be unbalanced.
26. Watch for branches, cables, doorways, or
overhangs. Pay caution when working in
congested areas.
–
Slow down and sound horn at cross aisles