Keleo Creations
Page 6 of 6
53875 NW Our Ln.
Gales Creek, Or. 97117
503-359-5318
Step 9
Reinstall the engine and slip the tubing over the
stack inlets.
Install the header pipe system to the stacks and
engine.
Your exhaust kit may come with aluminum flex
tubing, if this is the case then use Ultra Copper
Gasket Maker for the final assembly for sealing
the tubing to the header pipe and exhaust inlets,
this can be purchased at your local auto parts store.
Also for glow engines you will notice two pressure
nipples, one is for fuel pressure and the other is for
draining the system of excess fuel when fueling.
Side view of the finished install.
Be sure to do regular maintenance checks on your
exhaust system, this is a must for trouble free
flying.
You may have a different engine that what is
shown here, but everything is basically the same
from engine to engine.
I hope my instructions were clear and helpful and
you have lots of fun with this product.
Happy flying.
