Keleo Creations
Page 5 of 6
53875 NW Our Ln.
Gales Creek, Or. 97117
503-359-5318
Step 8
Position the template into the correct hole in the
fuselage (right template into the right side of the
fuselage; left template into the left side of the
fuselage). Note
FRONT
.
Position your drill bit over the dot in the center of
each hole. These holes hold the exhaust stacks in
place.
If needed, these holes can be enlarged later;
however, a washer will be needed on the bolt.
Bolt the stacks into their respective positions.
Please note that the stack should be placed into
the hole of the fuselage with the shroud, but the
shroud should not be screwed to the stacks until
after they are inserted into the fuselage.
View from inside of the engine compartment when
you are done installing the stacks.