Step 6.
With the landing gear retracted, fit the fairing to the
bottom of the wing as shown, lining up the trim colors on the
bottom of the wing. Secure the fairing in place with masking tape
and extend the landing gear. Use a felt-tipped pen to mark the
location of the wire on the fairing.
Step 7.
Turn the fairing over and draw a line from the top to the
bottom. Measure in 2" from both the top and the bottom and
mark the location for the mounting straps.
Step 8.
Position the mounting straps on their locations and use
a 3/32" drill bit to drill through the mounting block and fairing
as shown.
Step 9.
With the landing gear extended, mount the fairing to
the landing gear using the mounting straps, #2 wood screws,
and nuts.
19
Section 6
Installing the Main Landing Gear Wheels
and Fairings
CONTINUED
