Hangar 9 Extra Easy XE2, Инструкция по эксплуатации

Страница: 15 / 24

15
Evolution Trainer Power System
(continued)
Starting the Evolution Engine
To stop the engine, cut off the fuel and air supply by moving
the throttle stick and trim lever down to close the carburetor.
Do
not stop the propeller with your hand or other object.
Inspect the propeller after each flight; discard any propeller that
has nicks scratches, or any other visible defect. Do
not repair,
alter or in any way modify a propeller. Replacement propellers
are available through your local hobby retailer (EVOE100P).
Field Equipment Needed
The following are included in the Hangar 9 ® Start-Up Field
pack (HANSTART)
Sturdy cardboard construction Tote Box
Manual fuel pump
Two Hangar 9 glow plugs
4-way wrench
Rechargeable glow driver with charger
Chicken stick
Other Items Needed (not included in Start-Up
Field Accessory pack)
Fuel, 10 to 15% nitro content (Cool Power or Powermaster
recommended)
Electric Starter (optional)
Step 1 . Fill the fuel tank with the proper fuel. We recommend
10% or 15% Nitro content such as Cool Power or Powermaster
fuel. Fill the tank by connecting the fuel pump to the line that is
connected to the remote needle valve assembly. Disconnect the
fuel line attached to the pressure fitting of the muffler; your tank
is full when fuel begins to run out of the pressure line. Recon-
nect the fuel lines to the needle valve assembly and muffler.
Note: It is very important to reconnect the fuel lines to
the correct fitting. If they are reconnected incorrectly the
engine will not run properly.