![Hangar 9 Cessna 182 Skylane Скачать руководство пользователя страница 41](http://html2.mh-extra.com/html/hangar-9/cessna-182-skylane/cessna-182-skylane_instruction-manual_3607169041.webp)
41
Step 25:
Insert the Z-bend into the servo arm as shown. It may
be necessary to enlarge the holes in the servo arm slightly to
accept the Z-bend.
Note:
If you removed your engine in Section 8, reinstall it
prior to completing Step 26.
Step 26:
Install the throttle pushrod (17
3
⁄
4
”) using the same
method.
Note:
It will be necessary to drill a 1/8
″
hole in the firewall
in the correct position to allow the pushrod to
reattach to the throttle arm. Be careful not to drill into
the fuel tank when you drill this hole.
Step 27:
To install the steering pushrod, locate the 12
″
non-
threaded rod.
Step 28:
Carefully position the rod over the rudder servo arm
and determine the appropriate exit through the firewall. Drill a
1/16
″
hole in the firewall where the pushrod will exit.
Step 29:
Insert the steering pushrod through its respective
1/16
″
guidance holes in the fuselage and firewall.
Step 30:
Bend the rod 90 degrees and insert it through the
horn.
CONTINUED
Section 14: Installing the Linkages
Содержание Cessna 182 Skylane
Страница 48: ...Copyright 1998 Horizon Hobby Distributors Inc...