Hangar 9 Cessna 182 Skylane, Инструкция по эксплуатации

Страница: 26 / 48

26
Step 1: The nose gear mount is pre-assembled onto the front
firewall of the fuselage. Locate the nose gear and, on the straight
end, slide on the collar (note the orientation as shown in the
photo). Use Blue Locktite 242 and a medium Phillips
screwdriver to secure the collar in place. Next, install the
suspension spring.
Step 2: Insert the nose gear assembly from Step 1 onto the
nose gear mount (attached to the front of the fuselage). Be sure
the spring stays in position and rests against the nose gear
mount. Install the steering arm on the landing gear flush with the
landing gear, and secure it into position with a screw and the
Blue Locktite 242. You will remove one of the steering arms
later, after you have determined the location where the steering
rod exits the firewall.
Note: The wheel and the wheel pants will be attached later
in Section 11.
Section 9: Installing the Nose Gear
• Nose gear
• Suspension spring
• Steering arm
• Wheel collar with screws (2) • Medium Phillips screwdriver
• Blue Locktite 242
Parts Needed Tools and Adhesives Needed
Steering Arm
Spacing
Collar
Nose Gear