HandTop HT3200-UV K Series, Инструкция по установке

Страница: 54 / 113

53
1. Motion control option: Settings for printer motion
control.
2. Stepping speed and curing compensation: This function
is to compensate the curing pass and stepping speed
after the printing finished. Stepping speed options
include 1.0x and 1.3x, curing compensation include
2/4/6pass.
3. Stepping Skip at Blank Space: After selected, the printer
will skip the blank area of image while printing the job.
4. Auto printing after height detect finish: after selected,
the printer will automatically start printing after the
height detect is over.
5. Static suppress printing: The switch for anti-static bar,
selected means the anti-static is on.
6. One key print: After selected, the printer can continue
to print by pressing the “one key printing ” button or
double click “print”.
7. The option in grey color means cannot be selected, the
printer doesn’t support that function.
1. Negative pressure settings: Including color negative
pressure and white negative pressure. Grey colored
data represents the detected negative pressure, black
colored date is the set negative pressure.
2. Negative pressure setting range: 0.5~10Kpa.
3. Default negative pressure: -6.0Kpa.
4. Ink tank temperature settings: This is the heating
temperature setting for sub-tank, it is divided as the real
time temperature and the setting value, default setting
is 40
℃
.
1. UV lamp shutter working mode: Switches for controlling
the L&R movement for the L&R lamp. Only when the
corresponded switch been selected, the shutter would
open accordingly.
2. Parameter settings: Modify the on/off position of the
LED lamp within the printing area.
（
For adjust
instruction please refer to
（
4-1
）
Control parameter
interface-Settings for LED lamp on/off position control
）
.
3. UV power: Energy control for LED lamp, adjusting
arrange: 0%~100%.