HandTop HT3200-UV K Series, Инструкция по установке

Страница: 52 / 113

51
1. Optional printing modes: Draft, Production, quality,
high density. The default printing settings are available
for adjustment.
2. Direction options: uni-direction and bi-direction
3. Optional screen value: 1.0, 0.75, 0.5, 0.33, 0.25.
4. Ink Density: Each 1x of density will increase 1x of pass
number.
5. Carriage speed: 1.0x represents the maximum carriage
speed. Smaller value means slower speed.
1. White density control, smooth-high density: ink volume
and surface smoothness will change. Smooth -1.0X,
smoother -1.5X, average: 2.0X
，
printing quality changes
(while the white ink screen value differs), productivity
will not change
2. Normal speed-high density: The density and
productivity under normal speed is 1.0X, the density
and productivity under high density is 2.0X and 0.7X,
the productivity changed.
1. Cure printing: settings for strength and area of cure
printing, the increasing of strength is by adding PASS
number to increase the irradiation volume. Light:
2PASS, normal: 4PASS, intensive: 6PASS
2. The print heads are not jetting under cure printing, only
for strengthen the curing effect of the ink.
Copy printing: printing same image multiple times by
automatic copying. Can not be select while circulate
printing is on.
5.2.4Control system parameter interface