Handiquilter IN50005, Руководство по установке

Страница: 25 / 53

24 | Pro‑Stitcher Lite for the HQ Simply Sixteen www.ProStitcher.com
Align the Tracks to the Carriage
1. Place the four‑wheel carriage on the
tracks. Ensure the distance between
the front and rear tracks is correct
and consistent for the wheels. Move
the carriage along the track and slide
the tracks closer or further apart as
needed.
2. Once you have confirmed the tracks
fit into the carriage wheels, leave
the carriage on the tracks, push
the carriage and tracks as far to the
back as possible, align the back track
straight across the rear of the frame,
and fully tighten the back track
screws.
3. Roll the carriage to one end and
ensure the tracks are aligned the
correct distance apart and fully
tighten the front screws.
4. Repeat this process for the center and
end screws at the front.
NOTE: All screws should now be
tightened, and the machine should
roll freely down the track without
any resistance. If not, adjust the
distance between the tracks until
the carriage rides freely along the
track.
Â
IMPORTANT: A coarse adjustment
is made with the large flange
head screws from the underside
of the table. A fine adjustment is
made with the socketed flat head
screws on top with the 2.5mm hex
wrench. (See page
26 for more
information.)
lip toward
front