Handiquilter IN50005, Руководство по установке

Страница: 40 / 53

Pro-Stitcher Lite for the HQ Simply Sixteen Installation Instructions | 39
Troubleshooting
Problem/Symptom Corrective Measure
No display on the touchscreen monitor
The Pro‑Stitcher Lite tablet computer is powered off.
Press the Power button of the tablet to turn it on.
There is no power to the tablet computer. Ensure the
power cord to the Pro‑Stitcher Lite is plugged in to
a powered outlet. Check the connections of all the
power cords to the machine. If all cables are plugged in
properly, press the Power button on the monitor.
The stitch regulator cable is not connected properly
Pro‑Stitcher Lite moves but does not stitch. Check that all cables are securely attached.
Verify the Pro‑Stitcher Lite tablet and the quilting
machine are communicating with each other. Choose
the Settings tab, and then press the Advanced button.
From the drop‑down menu, choose Communications.
On the sidebar to the right, choose Reconnect Machine.
If the two systems are communicating, pressing the
Pro‑Stitcher tab and then the Full Stitch or Half Stitch
icons will result in the quilting machine’s needle
performing that function.
Pro‑Stitcher Lite stitches, but the stitch lengths
vary, and the quilting machine slows down or
even stops in some directions. The problem can be narrowed to a specific encoder
wheel by running the quilting machine manually.
Start the quilting machine from the handlebars in
Stitch Regulated mode, and only move the machine left
and right. Then try only moving front and back. If the
quilting machine stops stitching while moving front and
back, then the problem is with the encoder mounted
to the back of the machine. If it stops stitching while
moving left and right, then the problem is with the
encoder on the carriage. Make sure the encoder wheels
roll on the tracks when moving the quilting machine
and that the stitch regulator cable is plugged in securely
to the encoders.