background image

      

HQ Capri User Manual 

 | 5

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this machine.

When using this machine, basic safety precautions should always be followed, including the following:

DANGER

 — To reduce the risk of electric shock:

• 

 A quilting machine should never be left unattended when plugged in. Always unplug the machine from 

the electrical outlet immediately after using and before cleaning.

DANGER

 

— Pour réduire le risque de choc électrique :

• 

 Une machine à quilter ne doit jamais être laissée sans surveillance lorsqu'elle est branchée. Débranchez 

toujours la machine de la prise électrique immédiatement après usage et avant de la nettoyer.

WARNING

 — To reduce the risk of burns, fire, electric shock, or injury to persons:

• 

 The HQ Capri is heavy. Never attempt to lift it alone. Always use two people when lifting. 

 

Always lift from the throat of the machine.

• 

 Always unplug the HQ Capri from the electrical outlet when performing any maintenance, changing 

the needle, removing thread locks, or when left unattended.

• 

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• 

 Keep fingers away from all moving parts. Use caution around the needle or sharp

 

external components. 

• 

Change the needle often. Do not use bent or dull needles. “Every quilt deserves a new needle”.

• 

 Switch the machine to the symbol off, or 0, position to turn it off when making any adjustments in the 

needle area, such as threading needle, changing needle, threading bobbin, changing hopping foot, and 

so forth.

• 

Never drop or insert foreign objects into any opening.

• 

The HQ Capri should only be used indoors away from moisture.

• 

The HQ Capri should not be stored or used in extreme temperatures.

• 

Use the HQ Capri only for its intended use as described in this manual.

• 

 To disconnect from the wall outlet, push the switch to the off position, then remove the plug from 

outlet pulling from the plug, not the cord. Never operate the HQ Capri if the cord is damaged or 

not working correctly. If a mechanical or electrical problem is encountered, return the HQ Capri 

to the nearest authorized service center or the manufacturer for examination, repair, electrical, or 

mechanical adjustment.

• 

 It is not recommended that the HQ Capri quilting machine be used with any machine quilting frame 

other than those recommended by Handi Quilter.

• 

 Use this quilting machine only for its intended use as described in this manual. Use only attachments 

recommended by the manufacturer as contained in this manual.

• 

 Never operate the machine with any air openings blocked. Keep ventilation openings of the machine 

free from the accumulation of lint, dust, and loose cloth.

• 

 Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

Содержание HQ Capri 18























































Отзывы: