Handicare SystemRoMedic RiseAtlas625, Руководство пользователя

Страница: 32 / 48

C. Safety testing of RiseAtlas,
0. Emergency stop device.
1. Emergency lowering, mechanical and electrical.
2. Check all connection points, both H-adapter and sling bar safety latches.
D. Load and speed testing of RiseAtlas (performance),
0. Every first-time and periodic inspection shall include a working load test (safe working load) of one (1) lifting
cycle with the maximum load.
1. Check that maximum speed up/down of the lift is not exceeded. Maximum 0,25 m/s unloaded and
maximum 0,15 m/s loaded.
E. Overhead systems,
1. Check that there are no signs of wear or damage on the overhead system structure (ceiling, wall mounted,
upright supports) and particularly load bearing structure.
2. Check screws, bolts and nuts that they are correctly assembled and attached according to installation
manual. Check all structural attachment connections.
3. Check functionality and movement of system, traverse or single rail.
4. Check to ensure that the rail system is equipped with functional end stops.
5. Check labelling of equipment.
6. Check that overhead system documentation, installation manual, is available.
7. Check functionality and safety of other accessories, such as gates and switches.
8 Customer have received a training in operation and charging routines.
9 Photograph all installations and the areas surrounding the installations.
10 Clean the overhead system and working area.
11 Accessories
12 Every first-time Installation and periodic Inspection of an overhead system structure shall include a load test
according to (Weight testing procedure)
Overhead systems shall be installed, separate operation, according to installation manual and copy of installation
certificate shall be found in logbook.
32 S E R V I C E M A N U A L System
RoMedic
TM