Handicare SystemRoMedic RiseAtlas625, Руководство пользователя

Страница: 25 / 48

9. Remove battery holder on side with big gear
10. Remove micro switches that regulate the strap length
11. Remove the bottom plate from the chassis, do not contaminate the strap with grease
12. Remove the strap guide 13. Use caution while removing the guide,
the four springs can easily fall off
14. Remove the strap from the shaft by
taking out the safety pin and pulling
the out the strap
15. Mount the new strap, do not forget the safety pin. The pin
goes in the bigger opening in the shaft.
16. Mount the bottom plate to the chassis, do not pinch any cables.
17. Mount the micro switch device that regulates the strap
length. This component might need some adjustment in the
end while regulating the strap length.
18. Mount the battery holder.
19. Mount the main board and batteries.
20. Mount new interface plate
25
S E R V I C E M A N U A L
System RoMedic
TM