HandHeld Image Kiosk 8560 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 72

HandHeld Image Kiosk 8560 Скачать руководство пользователя страница 9

Image Kiosk 8560 User’s Guide- Pre-
liminary CP4 Draft

2 - 1

Getting Started

IK8560 Features

The IK8560 comes in two standard versions: the IK8560C with an on-board 802.11b radio and the IK8560E with a wired ethernet
connection. Here is a list of the standard features:

• Microsoft

Windows CE 5.0 operating system

• Intel

®

XScale PXA 255 200MHz processor

•           5.7" 320X240 backlit color display
•           Touch screen and protective overlay
•           64 MB SDRAM and 32 MB Flash ROM of on-board memory
•           Support for RS-232, RS-485, USB, and powered USB interfaces
•           Ethernet 10/100 Base-T communications port (IK8560E)
•           802.11b wireless radio (IK8560C)
•           USB host communications port
•           Adaptus Imaging Technology
•           Beeper

Connect the Power and Communication Cables

The IK8560 has a number of power and communication cables. Use one to apply power to the device.

For more information, see

Connecting the Power and Communication Cables

Boot the IK8560

1. The IK8560 begins booting as soon as power is applied from the cable.

2. The splash screen appears as the system cold boots (see

. The software version numbers for both

the bootloader and the kernel appear on the splash screen.

3. The device begins loading software; this is Autoinstall. A status bar appears for each program that loads. Do NOT interrupt

Autoinstall!

4. Autoinstall completes and the splash screen appears again as the system warm boots (see

5. When the warm boot is complete, you end on the Start screen.

Start Screen

The Start screen is your Desktop for the IK8560. The boot process ends on this screen.

2

«
...
7
8
9
10
11
...
»

Содержание Image Kiosk 8560









































































Отзывы:

Нет отзывов