HandHeld Image Kiosk 8560, Руководство пользователя, Страница: 61 / 72

Image Kiosk 8560 User’s Guide- Pre-
liminary CP4 Draft Rev (a)
6/27/06
6 - 5
Select an interval from 1 to 5 seconds. A checkmark appears next to the selected interval. Selecting None causes
the engine to scan continuously. To turn off automatic scanning, tap Scan > Automatic again.
Continuous Scan
Continuous scan activates the image engine continually, without a pause. To set the device to continuous scan, tap
Scan > Continuous and the engine begins scanning. Automatic scan must be turned off before you can activate
continuous scan. To turn off continuous scanning, tap Scan > Continuous again.
Note: If you want to track bar code scans during automatic or continuous scan, enable the scan statistics.
Enabling Scan Statistics
The Scan Demo can record scan statistics for each bar code scanned and for all bar codes scanned in an activated scan session.
By default, these statistics do not display on the screen.
To enable scan statistics and activate a scan session, tap Setup > View Statistics. The Scan Demo begins recording scan
statistics beginning with the next bar code scanned. The scan statistics will appear underneath the bar code readout.
Field Description
Symbology The symbology type.
Length The length of the bar code.
Count The number of scans completed since scan statistics were enabled. If you complete one scan, this
field displays a count of 1 and increases with each additional scan performed.
Time The number of milliseconds (ms) to decode the bar code.
Note: The following three fields display the cumulative scan statistics from the time that View Statistics was enabled. To
reset any of these values to zero, disable the scan statistics.
Average Time The average decode time of all bar codes decoded.
Min Time The shortest decode time of all bar codes decoded.
Max Time The longest decode time of all bar codes decoded.
Beeper
By default, the beeper sounds after each successful decoding. To turn off the speaker, tap Setup > Sound. The beeper will not
sound after your next successful scan.
Decode Mode
By default, the Scan Demo decodes in Full Omni Standard mode.