HandHeld Image Kiosk 8560, Руководство пользователя

Страница: 6 / 72

1 - 2 Rev (a)
6/27/06
Image Kiosk 8560 User’s Guide-
Preliminary CP4 Draft
Regulatory and Safety Approvals for all IK8560 Devices
Parameter Specification
U.S.A. FCC Part 15, Class A
Canada ICES-003
European Community EN 55022 (CISPR 22) Class A; 1998 +A1:2000; +A2:2003
EN60950
EN60825-1
EN55024:1998; +A1:2000; +A2:2003
The CE Mark on the product indicates that the system has been tested to and conforms with the provisions noted within
the 89/336/EEC Electromagnetic Compatibility Directive and the 73/23/EEC Low Voltage Directive.
For further information, please contact:
Hand Held Products, Inc.
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands
Hand Held Products, Inc. shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.)
that is not CE marked and does not comply with the Low Voltage Directive.
FCC Compliance
IK8560 devices meet or exceed all applicable standards and have been manufactured to the highest level of quality.
IK8560 Batch Device
IK8560 Batch devices comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
IK8560 RF Device With an 802.11b Radio
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio frequencies. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
In accordance with FCC 15.21, changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
!
This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter. To maintain compliance with FCC RF exposure guidelines, use only the accessories specified by the
manufacturer.
Canadian Compliance for IK8560 RF Devices With an 802.11b Radio
This Class A digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to
provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.