manualshive.com logo in svg

HandHeld Dolphin 7850 Series, Руководство пользователя

Поделиться
Скачать
HandHeld Dolphin 7850 Series Скачать руководство пользователя страница 109

Dolphin® 7850 Series User’s Guide–
Preliminary

Rev (b)

5/15/2007

10 - 7

ActiveSync Communication

The Dolphin terminal ships with ActiveSync already installed and defaulted to USB communication. If ActiveSync is not installed 
on your workstation, you must install it. For details, see 

Using ActiveSync

 on page 

7-3.

Communication Types

The HomeBase can communicate via USB or RS-232 using ActiveSync 4.1 or higher. However, the HomeBase should have only 
one type of interface cable connected at a time, either USB or RS-232.

USB

The 

USB Port

 (see page 10-3) on the back panel allows the terminal to communicate with a 

workstation or be networked through a USB hub. The HomeBase acts as a USB device by interfacing 
the USB signals of the terminal to the USB signals of the host workstation. 

Maximum data transfer rate is 12 Mbps.

RS-232

The 

RS-232 Port

 (see page 10-3) on the back panel allows the terminal to communicate with a 

workstation, modem, or any RS-232 device using a standard serial cable and communication 
software.

Maximum data transfer rate is 115 Kbps.

Communicating with the Dolphin Terminal

1. Insert the terminal into the terminal well of the HomeBase. 

•

The DOCK LED lights green. 
If not, make sure that the terminal is properly seated. You may need to remove and re-insert the terminal.

•

The terminal activates. 
If not, verify that the Hand Held Products power supply is properly connected to the 

DC Power Jack

 (see page 10-

3) on the back panel and plugged into a functioning outlet.

2. The terminal and the workstation automatically open ActiveSync to establish a connection.

3. The HomeBase can now transfer data between the terminal and the host workstation. If communication does not occur, 

check the port connections to ensure that the cradle is correctly configured. 

Verify Communication

You can verify that the USB driver is functioning by watching the COMM LED on the USB HomeBase. When the 
COMM LED lights solid green, the Dolphin HomeBase is communicating with the workstation.

Verify Data Transfer

The COMM LED flashes when data is being transferred via the Dolphin HomeBase. For an RS-232 connection, the 
COMM LED flashes red and green. For a USB connection, the COMM LED flashes green.

Содержание Dolphin 7850 Series





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды