manualshive.com logo in svg

HandHeld Dolphin 7850 Series, Руководство пользователя

Поделиться
Скачать
HandHeld Dolphin 7850 Series Скачать руководство пользователя страница 111

Dolphin® 7850 Series User’s Guide–
Preliminary

Rev (b)

5/15/2007

10 - 9

Mounting the Dolphin HomeBase

Set the HomeBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough 
workspace with good lighting for the user to view and operate the terminal while it is seated in the HomeBase.

When choosing a location, bear in mind that: 

•

the mounting location must allow users easy access to the auxiliary battery well, and

•

the serial and USB ports as well as the power jack face straight out of the rear panel, and you will most likely want easy access 
to them in the future.

Desk Mounting

Dolphin charging/communication cradles have a DIN rail (7.5 mm high X 35 mm wide) slot on the bottom to allow for secure desk 
attachment of the unit if desired.   

1. Slide the DIN rail slot along the bottom panel. 

2. Using the appropriate nuts and bolts, secure the DIN rail to the desk or flat surface. 

Note: Use screws that are appropriate for the type of surface (wood or metal, for instance) you are mounting to. 

Содержание Dolphin 7850 Series





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды