HandHeld Dolphin 7850 Series Скачать руководство пользователя | Manualshive

Страница: 103 / 132

background image

Dolphin® 7850 Series User’s Guide–
Preliminary

10 - 1

10

Dolphin HomeBase

Overview

As the hub of your Dolphin 7850 system, the Dolphin HomeBase charging and communication cradle supports both RS-232 and
USB communication, enabling your terminal to interface with the majority of PC-based enterprise systems.

Communication

RS-232 transmits data at speeds of up to 115 Kbps. With USB port, the data transmission rate goes up to 12 Mbps.

HomeBases cannot be physically connected to each other–sometimes referred to as “daisy-chaining”–but can be networked
together through serial or USB hubs.

Convenient Storage

Intelligent battery charging makes the HomeBase a safe and convenient storage receptacle for your terminal.

Capacity

The HomeBase can charge two battery packs: the one that’s installed in the terminal and the other in the auxiliary battery well
on the back panel. While charging the battery pack in the terminal, the HomeBase also powers the Dolphin terminal. The auxiliary
battery well charges a battery pack independently of the terminal well.

Intelligent Battery Charging

The HomeBase completes a full charge of the main battery pack in less than four hours.

In addition to charging, the HomeBase powers the intelligent battery charging system in the terminal that protects the battery
from being damaged by overcharging. The terminal senses when a battery pack is fully charged and automatically switches to a
trickle charge that maintains the battery at full capacity.

As a result, terminals may be stored in the HomeBase without damage to the terminals, battery packs, or peripherals.

Power Supply

The HomeBase is available with US, UK, and European power supplies. Each version is designed to convert the voltage from
the power sources in each geography to the 7.4 volts DC required by the terminal.

Use only the peripherals, power cables, and power adapters from Hand Held Products. Use of peripherals, cables, or power
adapters not sold/manufactured by Hand Held Products will void the warranty and may damage the terminal.

Use only the Li-ion battery packs provided by Hand Held Products. The use of any battery pack not sold/manufactured by Hand
Held Products in a Dolphin terminal will void your warranty and may result in damage to the Dolphin terminal or battery.

!

!

«
...
101
102
103
104
105
...
»

Содержание Dolphin 7850 Series





































































































































Отзывы:

Нет отзывов

Похожие инструкции для Dolphin 7850 Series

Toughbook CF-P1 Series

Бренд: Panasonic Страницы: 8

Бренд: RBR Страницы: 28

3001YR2 - Axim X3 - Win Mobile

Бренд: Dell Страницы: 178

Бренд: Cedar Страницы: 2

Бренд: Janam Страницы: 85

$Datalogic Kyman\ User Manual preview$

Бренд: Datalogic Страницы: 117

Бренд: Unitech Страницы: 21

Бренд: Unitech Страницы: 85

Бренд: Toshiba Страницы: 4

Бренд: Toshiba Страницы: 2

Бренд: Toshiba Страницы: 1

Бренд: Acer Страницы: 140

iPAQ Pocket PC H3150

Бренд: Compaq Страницы: 5

iPAQ Pocket PC h3600

Бренд: Compaq Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды