US-501 operation manual
US-501 R02 13.07.09 Display version 4, PLC version 4
P.19 of 31
>
Basic Operation
>> Control Panel Main page
Going into the operation main page. Basic parameters are needed to be set before operating the
machine. Refer to the corresponding sections for detail explanation.
1
cutter assembly
2
cutter pressure regulator (the number is the real time pressure, selecting range is -10 to +5)
3
sonic on/off switch, ready is sonic power on while off is sonic power off
4
cloth thickness selector (the number is the real time relevant speed, selecting range is 0 to 4)
R1
5
sonic on/off switch, ready is sonic power on while off is sonic power off
6
sonic frequency
7
sonic power regulator (the number is the real time power, selecting range is 1 to 10)
8
sonic cooling fan speed
9
cutter operation mode indicator (continuous working mode or pattern on processing mode)
10
to next page
11
sonic power consumption indicator
R1: Thicker cloth will be more difficult to cut, a slower speed will be more appropriate; conversely,
thinner cloth will be easier to cut, can apply with a faster speed
1
8
7
2
9
2
4
2
5
2
2
2
6
2
3
2
1
1
0
2
1
0
