AI-118 operation manual
issue 1 19.10.07 display version 07 . plc controller version 07
P.35 of 50
8. Tensioner follow.
On: After pressing the left foot pedal to swing the nozzle to the working position, the
tensioner will start to loosen the tape in advance to prevent the sealing speed from
being too fast, resulting in the jamming of the tape, which can ensure the machine
can work more stable and reliable.
Off: After pressing the left foot pedal to swing the air nozzle to the working position,
the tape feeder will not loosen the tape in advance, and the tensioner will only move
when the roller starts to rotate.
9. Front blowing.
On: The front blowing will work according to the parameter settings in tape start and
tape end pages.
Off: Turn off the front blowing, the parameter settings about front blowing in tape start
and tape end pages will not work.
10. Power saving delay.
Set the time of power saving delay, the setting range is 1-3000. Associated with the
#5 power save mode on this page, the setting will only work when the power save
mode is on, and the set time data will be displayed on the home page to countdown.
This item does not appear when the power save mode is off, as shown in the figure
23 "Parameter Page-2”.
11. Go back to the previous page; the previous page is the “main function” page.
