AI-002 operation manual
Issue 1 21.09.09 display version 13 . main controller version 69 . servo version 61
P.52 of 59
Appendix D . Tape Start, Tape Middle, Tape End Parameters
> Tape Middle Program (cont.)
> Tape Middle Program > motor start delay
This setting controls the delay timing that the upper roller starts to rotate, after the nozzle has
reached the normal operating position. A smaller setting means shorter delay hence making the
upper roller start to rotate earlier, while a larger setting means longer delay hence making the
upper roller start to rotate later. This is used to control the heat absorption of the tape middle.
Touch the ON/OFF button to enable/disable this function. If this function is disabled, there is no
delay so the upper roller rotates immediately after the nozzle arrived at the normal operating
position.
