H&B SENSOR SOEMER DAS 72.1 MKIII, Руководство пользователя, Страница: 14 / 27

SET UP THE DISPLAY (Continues on next page)
0
T
1
T
T
T
2
0
T
1
0
T
1
T
T
T
2
0
T
1
0
T 1
T
T
T
2
SET THE DISPLAY UNDER RANGE LIMIT. (MINIMUM VALUE -99,999) .
Use this menu point to define the display minimum value. If the displayed weight
drops below this minimum, the display will then show under range (dashes at the
bottom of the display) This can be useful to indicate when a weight value is outside a
normal range.
Use the UP/DOWN & MOVE RIGHT keys to set the minimum display value and store by
pressing the enter key. Factory default value -9,999.
0
T
1
DAS72.1MKIII
3
4
3
4
3
4
T
T
T
2
0
T 1 SELECT THE DISPLAY STEP SIZE. (1, 2, 5, 10, 20, 50, 100, 200 or 500)
Use this menu point to select the display step size. The minimum display step size is 1 [Factory default] up
to a maximum step size of 500. If for example you select a display step size of 50, the display will show
000, 050, 100, 150 etc as the weight value increases. Using higher step sizes will give a more stable weight
display but with a lower resolution.
Use the UP or DOWN key to select the required display step size. Press the enter key to store.
0
T 1
3
4
SET UP THE DISPLAY (OVER/UNDER RANGE LIMITS, STEP SIZE & DECIMAL POINT, LOGIC I/O STATUS)
If you wish to change any values in these sections, you have to first press the recessed enable switch (top left corner of unit)
Page 14
DAS72.1MKIII Manual v 4.xx
SET THE DISPLAY OVER RANGE LIMIT. (MAXIMUM VALUE +99,999)
Use this menu point to define the display maximum value. If the displayed weight
exceeds this maximum, the display will then show over range (dashes at the top of the
display). This can be useful to indicate when a weight value is outside a normal range.
Use the UP/DOWN & MOVE RIGHT keys to set the maximum display value and store by
pressing the enter key. Factory default value 10,000.