Hand Held Products IMAGETEAM IT4000HD Скачать руководство пользователя | Manualshive

Страница: 2 / 56

background image

Disclaimer

Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information
contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine
whether any such changes have been made. The information in this publication does not represent a commitment on the part
of Hand Held Products.

Hand Held Products shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated into another language without the prior written consent of Hand Held Products.

©

2002-2005 Hand Held Products, Inc. All rights reserved.

Web Address:

www.handheld.com

Microsoft

®

Visual C/C++

®

, Windows

®

95, Windows

®

98, Windows

®

2000, and Windows NT

®

are either registered trademarks

or trademarks of Microsoft Corporation in the United States and/or other countries.

Other product names mentioned in this document may be trademarks or registered trademarks of other companies and are the
property of their respective owners.

Note: Specification drawings are for reference only. Please contact Hand Held Products for the most current drawing.

FCC/CE

The IMAGETEAM™ (IT) 4X00 Series Image Engine, integrated into an OEM device, may require testing by the OEM to insure
compliance with the following federal regulations:

47 CFR Part 15

EC’s Electromagnetic Compatibility Directive (89/336/EEC) and Low Voltage Directive (73/23/EEC)

For CE-related inquiries, please contact:

Hand Held Products, Inc.
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands

Hand Held Products shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that
is not CE marked and does not comply with the Low Voltage Directive.

LED Eye Safety Statement for IT4000/IT4100 Series Engines

The IT4000/IT4100 series engine meets the requirements of a Class 1 Product as specified in IEC 825-1:1993 and EN 60825-
1:1994 when tested in a standard IT4410 and IT4710.

It is the OEM manufacturer’s responsibility to comply with applicable regulation(s) in regard to standards for specific equipment
combinations.

Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.

«
1
2
3
4
...
»

Содержание IMAGETEAM IT4000HD

























































Отзывы:

Нет отзывов

Похожие инструкции для IMAGETEAM IT4000HD

ASR-R250G Series

Бренд: AsReader Страницы: 17

Бренд: Rosewill Страницы: 1

Бренд: Opticon Страницы: 45

Бренд: Allen-Bradley Страницы: 115

Бренд: TwinMOS Страницы: 2

Бренд: Atid Страницы: 49

Бренд: Unitech Страницы: 2

Бренд: Unitech Страницы: 75

Бренд: Hand Held Products Страницы: 2

Fastmark M4 Series

Бренд: AMT Datasouth Страницы: 2

Fastmark M7 Series

Бренд: AMT Datasouth Страницы: 19

Fastmark M1/203dpi

Бренд: AMT Datasouth Страницы: 32

Бренд: Tally Dascom Страницы: 101

Бренд: Gemplus Страницы: 36

Бренд: Quatech Страницы: 2

Бренд: TagMaster Страницы: 23

Бренд: TagMaster Страницы: 32

Бренд: Unitech Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды