manualshive.com logo in svg

Hand Held Products IMAGETEAM 4400, Руководство пользователя

Поделиться
Скачать
Hand Held Products IMAGETEAM 4400 Скачать руководство пользователя страница 167

11 - 3

Limited Warranty

Welch Allyn, Inc., hereby warrants its products to be functional and free from 
manufacturing defects at the time of delivery.  Welch Allyn, Inc. further warrants 
that it will replace or repair, at its option, any unit that fails to perform according 
to Welch Allyn’s published specifications during a period of three (3) years from 
the time of shipment by Welch Allyn, Inc. to the user at the time it is purchased 
from any of Welch Allyn Inc.’s Authorized Distributors.  Any attempt on the part 
of the user to disassemble or service the equipment shall void the warranty.

The warranty does not apply to product which have been damaged by improper 
handling, shipping, or misuse.  The warranty does not apply, if, in the sole 
opinion of Welch Allyn, Inc., the unit has been damaged by accident, misuse, 
neglect, improper shipping and handling.  Since the unit is sensitive to static, the 
responsibility to protect it from static damage is solely that of the user.  The 
warranty is valid only if the unit or Imager has not been tampered with or 
serviced by any party unauthorized by Welch Allyn, Inc. as a repair facility.

THE WARRANTIES SET FORTH HEREIN ARE IN LIEU OF ANY AND ALL 
OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE.  THE BUYER ACKNOWLEDGES THAT NO OTHER 
REPRESENTATIONS WERE MADE OR RELIED UPON WITH RESPECT TO 
THE QUALITY AND FUNCTION OF THE BOARD AND IMAGER HEREIN 
SOLD.

In no event shall Welch Allyn, Inc. or its resellers be liable for any loss, 
inconvenience or damage whether direct, incidental, consequential or 
otherwise, and whether caused by negligence or other fault resulting from the 
breach of any express warranty except as set forth herein.  Some states do not 
allow the exclusion or limitation of incidental or consequential damages, so the 
above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights 
which vary from state to state or country to country. 

Содержание IMAGETEAM 4400























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды