manualshive.com logo in svg

Hand Held Products Dolphin 9500, Руководство пользователя, Страница: 80 / 314

Поделиться
Скачать
Hand Held Products Dolphin 9500 Скачать руководство пользователя страница 80

5 - 8

Dolphin® 9500 Series Mobile Computer User’s Guide - Preliminary Draft Rev (c)

Memory

The Memory system setting enables you to review and manage both RAM (volatile) and IPSM/Storage Card (non-volatile) 
memory. Dolphin 9500 Series terminals contain 64MB of on-board, volatile RAM memory.

Open the Memory setting whenever you receive system messages about memory.

There are three tabs: Main, Storage Card, and Running Programs.

Main tab

This tab displays the available, in use, and remaining RAM memory used for running and storing 
programs as well as storing program data. 

Field Description

Total main memory

Total RAM memory.

Storage 

RAM memory being used for storing programs and program data.

Program 

RAM memory being used to run programs.

Fields Under Storage and Program

Allocated

Displays the current amount of RAM memory allocated for Storage vs. Program use.

In use

Displays the current amount of RAM memory being used by Storage vs. Program memory functions.

Free

Displays the current amount of RAM memory available for Storage and Programs use.

To Increase/Decrease RAM Memory

To increase Program or Storage memory, tap, hold, and drag the slider towards the kind of memory you want to increase. The 
three fields adjust automatically; Program memory decrease when you increase Storage memory and vice versa.

Содержание Dolphin 9500



























































































































































































































































































































Отзывы:

Нет отзывов