manualshive.com logo in svg

Hand Held Products Dolphin 9500, Руководство пользователя, Страница: 206 / 314

Поделиться
Скачать
Hand Held Products Dolphin 9500 Скачать руководство пользователя страница 206

9 - 12

Dolphin® 9500 Series Mobile Computer User’s Guide

Tools Menu

The Tools menu provides the following options: 

Select this item

To…

Phonebook

Display the Phonebook.

Call Log

Switch to the Call Log.

SMS Manager

Switch to the SMS Manager Inbox.

Select Skin

Allow selection of a new skin for the uPhone Dialler application.

Configuration

Open the uPhone Configuration control panel

Ringtones

Switch to the ring tone selection control panel.

Exit

Exit the uPhone Dialler.

Settings Menu

The Settings menu provides the following options: 

Speakerphone

Toggles speakerphone mode on and off. When an audio plug (for a headset) is inserted into the audio 
jack (2.5mm), Speakerphone is inactive on this menu.

Mic mute

Toggles microphone mute on and off (the other party cannot hear a private conversation when the 
microphone is muted). This mode is active only during a call and automatically cancelled at the end 
of a call.

A checkmark to the left of the entry indicates that the mode is active. When the entry is grayed-out, it is unavailable and cannot 
be selected. 

Содержание Dolphin 9500



























































































































































































































































































































Отзывы:

Нет отзывов