HAMPTON BAY H35U-NG Скачать руководство пользователя страница 54

Страница: 54 / 60

Hampton® H35U Direct Vent Freestanding Gas Stove

warranty

Revision Date: February 2019

Regency Gas Products Warranty

Limitations of Liability:

The original purchaser’s exclusive remedy under this warranty, and FPI’s sole obligation under this warranty,

express or implied, in contract or in tort, shall be limited to replacement, repair, or refund, as outlined above. IN

NO EVENT WILL FPI BE LIABLE UNDER THIS WARRANTY FOR ANY INCIDENTAL OR CONSEQUENTIAL COMMERCIAL

DAMAGES OR DAMAGES TO PROPERTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, FPI MAKES NO EXPRESS

WARRANTIES OTHER THAN THE WARRANTY SPECIFIED HEREIN. THE DURATION OF ANY IMPLIED WARRANTY IS

LIMITED TO DURATION OF THE EXPRESSED WARRANTY SPECIFIED ABOVE. IF IMPLIED WARRANTIES CANNOT BE

DISCLAIMED, THEN SUCH WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some U.S. states do not allow limitations on how long an implied warranty lasts, or allow exclusion or limitation of

incidental or consequential damages, so the above limitations or exclusions may not apply to you.

Customers located outside the U.S. should consult their local, provincial or national legal codes for additional

terms which may be applicable to this warranty.

How to Obtain Warranty Service:

Customers should contact the authorized selling dealer to obtain warranty service. In the event the authorized

selling dealer is unable to provide warranty service, please contact FPI by mail at the address listed below. Please

include a brief description of the problem and your address, email and telephone contact information. A

representative will contact you to make arrangements for an inspection and/or warranty service.

Canadian Warrantor:

FPI Fireplace Products International Ltd.

6988 Venture St.

Delta, British Columbia

Canada, V4G 1H4

U.S. Warrantor:

Fireplace Products U.S., Inc.

PO Box 2189 PMB 125

Blaine, WA

United States, 98231

Or contact the Regency Customer Care Centre at 1-800-442-7432 (phone) / 604-946-4349 (fax)

Product Registration and Customer Support:

Thank you for choosing a Regency Fireplace. Regency strives to be a world leader in the design, manufacture, and

marketing of hearth products. To provide the best support for your product, we request that you complete a

product registration form at

http://www.regency-fire.com/Customer-Care/Warranty-Registration.aspx

within

ninety (90) days of purchase.

Содержание H35U-NG





























































Результаты поиска

Содержание H35U-NG

Отзывы:

Похожие инструкции для H35U-NG

Бренды по названию

Популярные бренды

HAMPTON BAY H35U-NG, Инструкция для владельца и по установке

Результаты поиска

Содержание H35U-NG

Отзывы:

Похожие инструкции для H35U-NG

Бренды по названию

Популярные бренды