1. Before you begin installing the fan,
shut power off
at the circuit
breaker or the fuse box.
2. Be cautious! Read all instructions and safety information before
installing your new fan. Review accompanying assembly diagrams.
3. Make sure that all electrical connections comply with local codes,
ordinances, or National Electrical Codes. Hire a qualified electrician or
consult a do-it-yourself wiring handbook if you are unfamiliar with
installing electrical wiring.
4. Make sure the installation site you choose allows the fan blades to rotate
without any obstructions. Allow a minimum clearance of 7 feet from the
floor and 18 inches from the tip of the blades to the wall.
5. If you are mounting the fan to a ceiling outlet box, use U.L. Listed
metal octagonal outlet box marked "Acceptable for fan support". Secure
the box directly to the building structure. The outlet box and its support
must be able to support the moving weight of the fan. (at least 35 lbs.)
Do
not use a plastic box.
6.
Caution:
To reduce the risk of personal injury use only the screws
provided with the outlet box.
7. If you are mounting the fan to a joist, make sure it is able to support the
moving weight of the fan (at least 50 lbs.).
8. After you install the fan, make sure that all mountings are secured to
prevent the fan from falling.
9. Do not insert anything into the fan blades while the fan is operating.
10. Turn the fan off and wait for it to stop completely before changing the
fan direction.
NOTE:
The important safeguards and instructions appearing in this
manual are not meant to cover all possible conditions and situations that
may occur. It must be understood that common sense, caution and care are
factors which can not be built into this product. These factors must be
supplied by the person(s) installing, caring for and operating the unit.
1. Safety Rules
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR OTHER
PERSONAL INJURY, MOUNT FAN ONLY TO A U.L. LISTED OUTLET BOX
OR SUPPORTING SYSTEM MARKED ACCEPTABLE FOR FAN SUPPORT
AND USE MOUNTING SCREWS AND LOCK WASHERS PROVIDED WITH
THE OUTLET BOX, MOST OUTLET BOXES COMMONLY USED FOR THE
SUPPORT OF LIGHTING FIXTURES ARE NOT ACCEPTABLE FOR FAN
SUPPORT AND NEED TO BE REPLACED. CONSULT A QUALIFIED
ELECTRICIAN IF IN DOUBT.
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE
HOLDERS WHILE INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS BETWEEN
ROTATING FAN BLADES.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS
FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE.
WARRING
NOTE
READ AND SAVE ALL INSTRUCTIONS!
ATTENTION:
The Energy Policy Act of 2005 requires this fan to be
equipped with a 190 watt limiting device. If lamping exceeds 190
watts, the ceiling fan's light kit will shut off automatically.
