Figure 16
8. Installing the
mounting plate
Step 1.
Remove 1 of 3 screws from the mounting
ring and loosen the other 2 screws. (Do not
remove)
Step 2.
Place the mounting plate key holes
over the 2 screws previously loosened from the
mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 16).
Screws
Mounting plate
Mounting ring
Screws
Connection plug
Light kit
Mounting plate
Figure 17
9. Installing the light
Kit
N O T E
: B e f o r e s t a r t i n g i n s t a l l a t i o n ,
disconnect the power by turning off the
circuit breaker or removing the fuse at
fuse box.
1. Remove 1 of 3 screws from the mounting
plate and loosen the other 2 screws. (Do
not remove)
2. Raise and hold the l
ight kit close to the
mounting plate and proceed to do the
wire connections. Connect the white wire
connectors from the light kit and fan,
follow the same procedure with the black
wire connectors. (Fig. 17)
3. Place the l
ight kit key holes over the 2
screws previously loosened from the
mounting plate, turn l
ight kit until it
locks in place at the narrow section of the
key holes. Secure by tightening the 2
screws previously loosened and the one
previously removed.
