Operating the Transmitter 11.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, etc.
The Reverse switch is located on the top of
the motor housing. Slide the switch to the
Left for warm weather operation. Slide the
switch to the Right for cool weather
operation.
NOTE
: Wait for fan to stop before changing
the setting of the slide switch.
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in
Figure 21. This allows you to set your air
conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Figure 22. This allows you to set your
heating unit on a lower setting without
affecting your comfort.
Restore power to the ceiling fan and test
for proper operation.
3. The
" "
button turns the light ON or OFF
and also controls the brightness setting.
Press and release the button to turn the light
ON or OFF. Press and hold the button to set
the desired brightness. The light key has an
auto-resume, it will stay at the same
brightness as the last time it was turned off.
1.
"HI, MED, LOW"
buttons:
These three buttons are used to set the fan
speed as follows:
LOW
=Low speed
MED
= Medium speed
HI
=High speed
2.
"OFF"
button:
This button turns the fan off.
Figure 19
Installing the battery:
Install
1 2 V M N 2 1 / A 2 3
battery (not
i n c l u d e d ) , t o p r e v e n t d a m a g e t o
transmitter, remove the battery if not used
for long periods.
Figure 20
