Hampshire Controls Corp.
Revision 1.2
Temperature Transmitter Operating Instruction
Page 15 of 21
©2014
Programming Mode
To enter Programming Mode press-and-hold the DISP/PROG button for 5 seconds. You will
hear a beep. The LCD will turn on and show the following:
This indicates that you are about to change the Low
Temperature Alarm Limit. If you tap either the
DISP/PROG button or the MUTE/CAL button the current
Low Temperature Alarm Limit will be displayed on the
LCD.
To increase the low limit tap the DISP/PROG button, to
decrease the low limit tap the MUTE/CAL button. When
you are finished, or if you do not want to change the
value, simply wait. If no buttons are tapped for 5
seconds, the current value will be saved and the next
option will be displayed.
This indicates that you are about to change the Low
Temperature Alarm Limit. If you tap either the
DISP/PROG button or the MUTE/CAL button the current
Low Temperature Alarm Limit will be displayed on the
LCD.
To increase the high limit tap the DISP/PROG button, to
decrease the high limit tap the MUTE/CAL button. When
you are finished, or if you do not want to change the
value, simply wait. If no buttons are tapped for 5
seconds, the current value will be saved and the next
option will be displayed.
This indicates that you are about to change the Alarm
Delay (in minutes). If you tap either the DISP/PROG
button or the MUTE/CAL button the current Alarm Delay
will be displayed on the LCD.
To increase the alarm delay tap the DISP/PROG button,
to decrease the alarm delay tap the MUTE/CAL button.
When you are finished, or if you do not want to change
the value, simply wait. If no buttons are tapped for 5
seconds, the current value will be saved and the next
option will be displayed.
This indicates that you are about to change the Alarm
Mute or Silence Period (in minutes). If you tap either the
DISP/PROG button or the MUTE/CAL button the current
Silence Period will be displayed on the LCD.
