Hampshire Controls Corp.
Revision 1.2
Temperature Transmitter Operating Instruction
Page 11 of 21
©2014
This is the final step in the Web Configuration.
First select a unique 5 character Unit ID. This will
identify the Temperature Transmitter on the
T°Sentry ALERT System server.
You may then change the other alarm and display
options (See Programming Mode, page 15, for
more information).
Select Save Settings when you are done. Select
Reboot the module from the main menu or tap the
RESET
button
to
reboot
the
Temperature
Transmitter.
Depending on your device options, this menu may
have other options.
If the Temperature Transmitter fails to connect to your network after the initial Web
Configuration, you should first repeat the Web Configuration to verify that the settings you
entered were correct. Some common mistakes are incorrect case in the SSID or network
password, or mistyping values on the IP configuration page.
