Hammond Skx PRO Скачать руководство пользователя страница 572 | Manualshive

Страница: 572 / 754

Hammond Skx PRO Скачать руководство пользователя страница 572

552

Equalizer

If you are editing the EQUALIZER for the ORGAN Voice Section, you will see an additional Parameter,
“TONE CONTROL.” From the screen shown on the previous page, press the DIRECTION “

u

” button

once.

The box underneath “TONE CONTROL” should be highlighted.

TONE CONTROL

This Parameter duplicates the performance of the tone control on the AO-28 preamp of a B-3 or C-3 or the
AO-29 preamp on an A-100. Its purpose is, to cut the overall treble above 200Hz gently. You can select
from -9 to +9. At 0, the effect becomes neutral, “-5,” is a moderate amount of treble cut and “-9,” is the
maximum amount.

NOTE:

A setting of

-1

corresponds to the maximum setting of the B-3/C-3/A-100 tone control.

NOTE:

The tone control found on the B-3/C-3, was only available at

minus

settings, but this Parameter allows

you to select

plus

settings as well.

NOTE:

The sound may distort if gains are raised too high. Adjust accordingly.

NOTE:

This Parameter is

not

available for the

Pipe

Organ Type.

Turn the VALUE knob to the right to increase the setting.

Turn the VALUE knob to the left to decrease the setting.

HA<O>

SKX PRO Reference Guide

«
...
570
571
572
573
574
...
»

Содержание Skx PRO



















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов