Hammond Skx PRO, Справочное руководство, Страница: 300 / 754

280
PIANO / ENSEMBLE Voice Sections
From the screen shown at the bottom of the previous page, press the DIRECTION “ q ” button once.
The box to the right of “KEY TRACK” should be highlighted.
KEY TRACK
This Parameter allows you to adjust the amount of pitch change between keys on the keyboard for the
selected Component. You can select from -100 to +100. At +100 the musical distance between any two
adjacent notes will be 100 cents or one half-step. This is the normal setting. At +50• the notes will be one
quarter-step apart. At 0 every note on the keyboard will sound the same pitch. A minus setting will cause
notes to decrease in pitch as higher notes are played on the keyboard.
Turn the VALUE knob to the right to transpose the selected Component higher.
Turn the VALUE knob to the right to transpose the selected Component lowest.
From the above screen, press the DIRECTION “
q
” button once.
The box to the right of “FINE TUNE” should be highlighted.
FINE TUNE
This Parameter allows you to adjust the sounding pitch of the selected Component by cents. You can
select from -100 to +100. At “-100" the pitch will be one half-step flat. At “+100" the pitch will be one
half-step sharp.
Turn the VALUE knob to the right to increase the Plus Depth.
Turn the VALUE knob to the left to decrease the Plus Depth.
HA<O>
SKX PRO Reference Guide