Hammond Skx PRO, Справочное руководство, Страница: 285 / 754

265
PIANO / ENSEMBLE Voice Sections
From the screen shown at the bottom of the previous page, press the DIRECTION “ q ” button once.
The box to the right of “ATTACK RATE” should be highlighted.
ATTACK RATE
This Parameter allows you to adjust the amount of time for the LFO to build to its full amount when using
Delay Time. You can select from 0 (the LFO begins immediately) to 127 (maximum time).
Turn the VALUE knob to the right to increase the Attack Rate.
Turn the VALUE knob to the left to decrease the Attack Rate.
NOTE: Delay Time must be set to some value other than 0 to hear the effect of this Parameter.
From the above screen, press the DIRECTION “ q ” button once.
The box to the right of “RATE KEY TRK” should be highlighted.
RATE KEY TRK
This Parameter allows you to adjust how the Attack Rate is modulated by the note or pitch. You can select
from 0 (no Key Tracking) to 127 (maximum Key Tracking - the rate of Attack increases as higher notes are
played).
Turn the VALUE knob to the right to increase the amount of Attack Key Tracking.
Turn the VALUE knob to the left to decrease the amount of Attack Key Tracking.
HA<O>
SKX PRO Reference Guide