Hammond Skx PRO, Справочное руководство, Страница: 194 / 754

174
ORGAN Voice Section
Chorus
When the CHORUS effect is used, half of the tone is heard without Vibrato, and half of the tone is heard
with Vibrato.
C-1 (Small Chorus)
To select chorus depth C-1, press the MODE button so that the orange LED next to
the legend, “C-1" will light. This is the lightest depth, and produces the light chorus
effect.
C-2 (Wide Chorus)
To select chorus depth C-2, press the MODE button so that the orange LED next to
the legend, “C-2" will light. This is the standard depth of the chorus effect.
C-3 (Full Chorus)
To select chorus depth C-3, press the MODE button so that the orange LED next to
the legend, “C-3" will light. This is the fullest amount.
Remember, either one or both of the UPPER or LOWER buttons must be "ON" (orange
LED lit) to allow you to hear the selected Vibrato effect for each Keyboard.
t SPECIAL NOTE - Vx., Farf., Ace and Pipe Organ Types
Instead of three degrees of Vibrato and three degrees of Chorus, the VIBRATO & CHORUS Controls will
provide 6 degrees of Vibrato for the Vx., Farf. and Ace Organ Types and 6 degrees of Tremulant for the
Pipe Organ Types. V-1 provides the smallest amount while C-3 gives the largest amount of Vibrato or
Tremulant. The other modes provide various degrees between these two settings.
HA<O>
SKX PRO Reference Guide