Hammond Skx PRO, Справочное руководство, Страница: 470 / 754

450
CUSTOM SETS - Pipe
t Recording a Custom Pipe
IMPORTANT NOTE: If you change any of the Custom Pipe Parameters, you must save them in order for
them to be remembered. If the changes are not saved, they will be lost when the power to the instrument is
switched “OFF.”
TRY THIS:
1. Access the CUSTOM EDIT -PIPE FUNCTION Mode using the procedure described on page 437.
You should now see Page 1 of the CUSTOM EDIT -PIPE FUNCTION Mode. The box underneath
“CUSTOM” should be highlighted
2. Turn the VALUE knob to select the Custom Pipe Set you want to edit.
3. Make whatever changes you want to the editable Parameters. The Custom Pipe Parameters are
covered on pages 439 through 449.
4. When you have completed your edits, press the red RECORD button. The Information Center
Display will look similar to this. The box underneath “TO” should be highlighted.
5. Use the VALUE knob to select the target Custom Pipe (the Custom Pipe you want to Record to).
You can select from U1 to U8.
NOTE: For a complete list of the Parameters that can be modified for a Custom Pipe, consult page 720
of the APPENDIX chapter of this Guide.
NOTE: If you have already made changes to a Custom Pipe and you want to Record your changes, you
can skip Steps 1 through 3 and go directly to Step 4.
HA<O>
SKX PRO Reference Guide